Ventlab Infant Oxygen Cannula with 7' Tubing

The Ventlab Infant Oxygen Cannula is a lightweight nasal oxygen cannula designed for infant oxygen delivery. Its one-piece anatomical design eliminates the need for a separate lip plate or potentially irritating flap while helping provide a secure, comfortable fit.

The cannula features an over-the-ear design with curved nasal prongs and 7 feet of three-channel oxygen supply tubing. The three-channel tubing is designed to help resist kinking and maintain oxygen delivery during use.

Product / Catalog #: 1307

Need help with oxygen supplies? Contact State Medical Equipment:

State Medical Equipment
3950 East Sunset Road, Suite 112
Las Vegas, NV 89120
Call: 702-538-9555
Email: help@statemedicalequipmentlv.com

Key Features

• Designed for Infants – Sized specifically for infant oxygen delivery.

• One-Piece Anatomical Design – Designed without a separate lip plate or flap.

• Over-the-Ear Style – Helps keep the cannula properly positioned during use.

• Curved Nasal Prongs – Designed for comfortable positioning at the nares.

• 7' Oxygen Supply Tubing – Provides additional reach between the patient and compatible oxygen source.

• Three-Channel Tubing – Designed to help resist kinking.

• Standard Oxygen Connector – Catalog #1307 configuration uses the standard connector.

• Clear, Lightweight Design – Designed to minimize bulk during use.

• Not Made with Natural Rubber Latex – Confirmed for this device.

• Single-Use Device – Intended for single-patient use.

Specifications

Designed Specifically for Infants

The Ventlab 1307 is an infant oxygen cannula, rather than an adult or pediatric-size cannula.

Its smaller patient-specific design is intended to provide an appropriate fit for infant oxygen delivery when used with compatible oxygen equipment and according to the patient's prescribed therapy.

Correct cannula sizing is important. Infant, pediatric, neonatal, and adult cannulas should not be treated as interchangeable solely because they connect to similar oxygen equipment.

One-Piece Anatomical Design

The cannula's one-piece anatomical design eliminates the need for a separate lip plate or flap.

This creates a less bulky interface around the infant's face while maintaining the positioning needed for nasal oxygen delivery.

Curved Nasal Prongs

The Ventlab infant cannula uses curved nasal prongs designed to position comfortably at the nares.

The over-the-ear configuration helps keep the cannula positioned while allowing normal movement.

Cannula placement should be checked regularly to make sure the prongs remain properly positioned and the tubing is not creating unnecessary pressure on the patient's skin.

7' Three-Channel Oxygen Tubing

Catalog #1307 includes 7 feet of oxygen supply tubing.

The three-channel tubing construction is designed to help prevent kinking, which can otherwise restrict oxygen flow.

The 7-foot length also provides useful distance between the infant and a compatible oxygen source.

Standard Oxygen Connector

The 1307 configuration uses a standard oxygen connector.

Ventlab also manufactured a separate 1307F configuration with a Fits-All connector, so these product numbers should not be treated as identical when managing inventory.

Confirm the connector and compatibility with the oxygen equipment being used before connecting the cannula.

Single-Patient Use

The Ventlab Infant Oxygen Cannula is intended as a single-use / single-patient oxygen delivery device.

Do not share a used cannula between patients.

Replace the cannula according to healthcare-provider instructions, facility protocol, visible condition, contamination, or applicable manufacturer guidance.

Important Use Information

Before using the Ventlab Infant Oxygen Cannula:

• Confirm that the infant size is appropriate for the patient.

• Connect only to compatible oxygen-delivery equipment.

• Follow the patient's prescribed oxygen therapy.

• Confirm that oxygen is flowing properly after connection.

• Make sure the tubing is not kinked, pinched, or obstructed.

• Position the curved nasal prongs appropriately.

• Check the infant's skin regularly for irritation or pressure.

• Keep excess tubing positioned safely to reduce entanglement risk.

• Do not modify the cannula or tubing.

• Replace damaged, contaminated, or excessively worn equipment.

Frequently Asked Questions

Is Ventlab 1307 an infant or pediatric cannula?
Catalog #1307 is an infant oxygen cannula.

How long is the tubing?
The cannula includes 7 feet of oxygen supply tubing.

What type of tubing does it use?
It uses three-channel tubing designed to help resist kinking.

Does it have a lip plate?
No. The cannula uses a one-piece anatomical design without a separate lip plate.

What style are the nasal prongs?
The cannula uses curved nasal prongs.

Does catalog #1307 have a Fits-All connector?
No. Catalog #1307 is the standard-connector configuration. The separate 1307F configuration is the version identified with a Fits-All connector.

Is it made with natural rubber latex?
The device is identified as not made with natural rubber latex.

Is the cannula reusable?
It is identified as a single-use device intended for single-patient use.

Can it be used with any oxygen concentrator or tank?
Compatibility depends on the oxygen source, connector, and prescribed setup. Confirm compatibility before use.

Need Help With Oxygen Cannulas & Supplies?

State Medical Equipment can help with oxygen cannulas, tubing, oxygen concentrators, oxygen cylinders, regulators, and other compatible respiratory supplies.

If you're replacing an existing cannula, provide the patient size and existing product/catalog number so the correct configuration can be identified.

Contact State Medical Equipment

State Medical Equipment
3950 East Sunset Road, Suite 112
Las Vegas, NV 89120

Call: 702-538-9555
Email: help@statemedicalequipmentlv.com