Rhythm Healthcare 10L Oxygen Concentrator for High-Flow Home Oxygen

The Rhythm Healthcare LM10A 10L Oxygen Concentrator is a stationary continuous-flow oxygen concentrator designed for prescribed home oxygen therapy requiring 1 to 10 liters per minute (LPM).

With oxygen purity rated at 87%–96% across the 1–10 LPM range, the LM10A provides higher-flow capability than a standard 5-liter concentrator. It also features an oxygen purity sensor, integrated fire safety valve, 18–22 PSI outlet pressure, and a stationary design built for home oxygen use.

At approximately 50.7 lbs. and measuring 24.5" H × 14.6" W × 13.6" D, the LM10A provides up to 10 LPM of continuous-flow oxygen in a dedicated stationary system.

Need help before ordering? Contact State Medical Equipment:

State Medical Equipment
3950 East Sunset Road, Suite 112
Las Vegas, NV 89120
Call: 702-538-9555
Email: help@statemedicalequipmentlv.com

Prescription required for oxygen equipment. Oxygen flow should always be used according to the patient's prescription.

Key Features

• 1–10 LPM Continuous Flow – Adjustable continuous oxygen delivery for prescribed flow requirements within the concentrator's rated range.

• 87%–96% Oxygen Purity – Rated oxygen purity across the 1–10 LPM flow range.

• 10L High-Flow Capacity – Provides up to 10 LPM for prescribed oxygen requirements beyond the capacity of a standard 5L concentrator.

• Oxygen Purity Sensor – Built-in monitoring helps track the oxygen concentration produced by the unit.

• Integrated Fire Safety Valve – Included as a standard safety feature.

• 18–22 PSI Outlet Pressure – Provides higher outlet pressure as part of the LM10A's oxygen delivery system.

• 560W Power Consumption – Manufacturer-rated power consumption.

• Stationary Home Oxygen Design – Designed as a stationary concentrator rather than a portable oxygen system.

• Rhythm Resolve Coverage – LM10A is included in Rhythm Healthcare's Rhythm Resolve Warranty Replacement Program, subject to current program terms.

• 3-Year Device Warranty – Manufacturer warranty with compressor coverage up to 15,000 hours.

Who Is the Rhythm Healthcare LM10A For?

The LM10A is designed for individuals who have been prescribed stationary continuous-flow oxygen therapy within its 1–10 LPM operating range.

It may be considered when:

• A prescription requires continuous-flow oxygen beyond the capacity of a standard 5L concentrator

• Replacing an existing 10-liter stationary oxygen concentrator

• A stationary home oxygen system with higher-flow capability is required

• The patient's prescribed equipment requirements fall within the LM10A's operating specifications

The appropriate oxygen flow rate is determined by the patient's healthcare provider. Do not change a prescribed oxygen flow rate without instructions from the prescribing clinician.

5L vs. 10L Oxygen Concentrators

One of the most important considerations when comparing stationary oxygen concentrators is the patient's prescribed flow requirement.

The Rhythm Healthcare LM10A provides continuous flow from 1–10 LPM, giving it greater maximum flow capacity than a standard 5-liter concentrator.

A 10L concentrator should not automatically be selected simply because it offers greater capacity. The appropriate equipment should match the patient's prescription and required equipment specifications.

Specifications

High-Flow Oxygen Up to 10 LPM

The Rhythm Healthcare LM10A provides adjustable continuous-flow oxygen from 1 to 10 LPM, giving patients with higher prescribed oxygen requirements a stationary option with greater capacity than a standard 5L concentrator.

Rhythm Healthcare specifies an oxygen purity range of 87%–96% at 1–10 LPM.

The LM10A is intended as a stationary oxygen concentrator, not a portable oxygen concentrator. At approximately 50.7 lbs., it is designed to remain part of a home oxygen setup rather than being routinely carried for mobile use.

Built-In Oxygen Purity Monitoring

The LM10A includes an oxygen purity sensor as a standard feature.

The concentrator also incorporates a visible low-oxygen indicator. According to the manufacturer manual, the yellow low-oxygen light activates when oxygen concentration falls below the specified threshold after the unit's warm-up period.

Built-in oxygen monitoring provides an additional way to monitor the operating status of the concentrator during use.

Integrated Fire Safety Valve

An integrated fire safety valve is standard on the LM10A.

This safety feature is incorporated into the oxygen delivery system as part of the concentrator's design.

Oxygen supports combustion, so all oxygen equipment should be operated according to the manufacturer's instructions and applicable oxygen safety precautions.

High Outlet Pressure

The LM10A has a manufacturer-specified normal outlet pressure of 18–22 PSI.

This is a technical characteristic of the concentrator and should not be confused with the patient's prescribed oxygen flow rate. Flow settings should always follow the patient's prescription.

Size, Weight & Home Placement

The LM10A measures approximately:

• 24.5" high

• 14.6" wide

• 13.6" deep

• 50.7 lbs.

Because this is a stationary concentrator, placement should follow the manufacturer's operating instructions, including appropriate ventilation and environmental requirements.

Warranty & Rhythm Resolve Program

The LM10A carries a 3-year device warranty with compressor coverage up to 15,000 hours.

The LM10A is also currently listed among the stationary oxygen concentrators covered by the Rhythm Resolve Warranty Replacement Program.

Rhythm Resolve is designed to replace qualifying units with manufacturer defects rather than repairing them, subject to Rhythm Healthcare's current eligibility requirements, warranty terms, return procedures, and other program conditions.

Warranty claims are handled through the provider from which the equipment was purchased.

Replacement Filters & Related Supplies

Rhythm Healthcare identifies replacement components for the LM10A, including:

• LM10A-BF Bacterial Filter

• LM10A-ILF Air Inlet (HEPA) Filter

Additional oxygen supplies may be required depending on the patient's prescribed setup and existing equipment.

Replacement parts and accessories are sold separately unless specifically stated as included with the concentrator being purchased.

If you're unsure which replacement part or oxygen supply is compatible with your LM10A, contact State Medical Equipment before ordering.

Important Purchase Information

Before purchasing the Rhythm Healthcare LM10A, please note:

• This is a stationary continuous-flow oxygen concentrator, not a portable oxygen concentrator.

• Rated flow range is 1–10 LPM.

• Manufacturer-listed oxygen purity is 87%–96% at 1–10 LPM.

• Oxygen flow must be used according to the patient's prescription.

• A prescription is required for oxygen equipment.

• Do not change prescribed oxygen settings without instructions from the patient's healthcare provider.

• Accessories and replacement parts are sold separately unless specifically stated otherwise.

• Confirm compatibility before purchasing replacement filters, oxygen supplies, or other accessories.

Frequently Asked Questions

What is the flow range of the Rhythm Healthcare LM10A?
The LM10A provides adjustable continuous-flow oxygen from 1 to 10 LPM.

What oxygen purity does the LM10A provide?
Rhythm Healthcare specifies oxygen purity of 87%–96% at 1–10 LPM.

Is the Rhythm Healthcare LM10A continuous flow?
Yes. The LM10A is a continuous-flow stationary oxygen concentrator.

What is the difference between a 5L and 10L oxygen concentrator?
One of the primary differences is maximum flow capacity. The LM10A provides up to 10 LPM, while a standard 5L concentrator has a lower maximum flow capacity. The appropriate equipment depends on the patient's prescription and equipment requirements.

Does the LM10A require a prescription?
Yes. A prescription is required for home oxygen equipment.

Does the LM10A monitor oxygen purity?
Yes. An oxygen purity sensor is standard on the LM10A.

Does the LM10A have a fire safety valve?
Yes. Rhythm Healthcare specifies an integrated fire safety valve as a standard feature.

How much does the Rhythm Healthcare 10L concentrator weigh?
The LM10A weighs approximately 50.7 lbs.

How large is the LM10A?
It measures approximately 24.5" H × 14.6" W × 13.6" D.

How loud is the LM10A?
The manufacturer specifies a sound level of ≤60 ± 2 dBA.

Is the LM10A portable?
No. The LM10A is a stationary oxygen concentrator designed for stationary home oxygen use.

What is the warranty on the Rhythm Healthcare LM10A?
The manufacturer specifies a 3-year device warranty with compressor coverage up to 15,000 hours. The LM10A is also included in Rhythm Healthcare's Rhythm Resolve Warranty Replacement Program, subject to current program terms.

Need Help Comparing 5L vs. 10L Oxygen Concentrators?

Not sure which stationary oxygen concentrator matches your existing prescription and equipment requirements?

State Medical Equipment can help you compare equipment specifications and identify compatible oxygen supplies and replacement components.

Our team can assist with equipment and product information, but the patient's prescribed oxygen flow rate should always be determined by their healthcare provider.

Contact State Medical Equipment

Have questions about the Rhythm Healthcare LM10A 10L Oxygen Concentrator, replacement filters, compatible supplies, or equipment specifications? Contact us before ordering.

State Medical Equipment
3950 East Sunset Road, Suite 112
Las Vegas, NV 89120

Call: 702-538-9555
Email: help@statemedicalequipmentlv.com

Prescription required for oxygen equipment.